Much space on the 3/4" Duplex-chain for a carefull pallet transportation
Improved crossings by small deflection radius of the 3/4" duplex-chain
The load is measured by the Shape Control; its length, width and height. Pallets that do not conform to measurements are diverted.
The Shape Control is individually designed for the product measurements and conveyor height for the customer's needs.
PROCON PROCON Empty Pallet Magazine
20 pallet capacity
Conveyor heights and widths vary
Pneumatic lifting and clamping movements
Optional protective housing
Drive of the gripper arms in synchronization via chain or by cog
Air consumption: 95 liters per pallet.
This device tilts the pallet of 50° (approx.), in order to undergo a visual inspection from below and from above.
The positioning and pivoting of the pallet is done automatically. During the pivoting operation, the operator has the opportunity to inspect the pallet, however he cannot intervene at this point.
Pallet Dressing Line
The Pallet Dressing line coats pallets with a foil or cardboard layer, to contamination taking place beneath the product.
Performance: 2 pallets per minute
Foil width: max. 1350 mm
Foil length: 800 up to 1800 mm
Stitching heads: max. 9 pieces
Width according to customer specificatiom
Selection of roller types, specific to the load and size of the conveyed material
Load and speed to customer requirements
Adjustable (±50 mm)
Conveyor height designed to customers specification, starting at 400 mm
Available in powder coated or in stainless steel
Sensors (e.g. light barrier systems or integrated in a roll)
Roll Corner Transfer Conveyor
Width according to customer specification
Stroke allows for adjustable height
Selection of roller type, according to the load and the size of the conveyed material
Load and speed to customers requirements
Adjustable feet ± 50 mm
Conveyor height according to customers specification starting at 400 mm
Available powder coated or in stainless steel
Accumulation Roller Conveyor
This type of conveyor serves as a buffer between products (normally pallets). The Accumulation Conveyor needs only one gear motor as the clocked transport of the pallets is regulated by pneumatics. When a pallet position is empty, the following pallet is lifted by a pneumatic valve and transported over this position. This procedure is automatically repeated every time a pallet leaves the conveyor.
At a take-over of the product, the pulley is free again and the products move up automatically.
A sensor is not necessary because a simple pneumatic control stops the products and takes them off.
Furthermore, the entire conveyor requires only one drive.
Height of stroke 5000mm
Can be equipped with differnet fittings (roller comveyors, chain comveyors, etc.)
Robust steel construction
Durable chain drive with 1 1/4" chain
Interior counter weight
PROCON Shuttle cars
Adjustable speed, from 40 m/min up to 100 m/min
Product height max 2700 mm at shuttle car height 3710 mm
Transport loading weight 3000 kg
Shuttle car weight 4000 kg
5-chain conveyor with 3/4" chains, track gauges 700 / 900 mm
Conveyor speed (chain conveyor) 12 m/min
Conveyor height mm
Warning horn and flashing light on the shuttle car
Personal protection via laser scanner-field
Emergency stop button mounted on all four sides
Rugged steel frame
4 piece of steel wheels (with wheel flange Ø400 mm) with clamping element
Drive Shaft 2 pcs Ø 60 mm
Cable-free connection via sliding contact pantograph. Data transfer by a photoelectric sensor.
Die Cookie-Einstellungen auf dieser Website sind auf "Cookies zulassen" eingestellt, um das beste Surferlebnis zu ermöglichen. Wenn du diese Website ohne Änderung der Cookie-Einstellungen verwendest oder auf "Akzeptieren" klickst, erklärst du sich damit einverstanden.